Tarrant County · Richland Hills, Texas
Richland Hills Ranch Homes, Re-Roofed for Low Slopes and High Wind
Richland Hills is a small, settled city of about 8,500 where nearly every home is a 1950s-1960s single-story ranch, and those low-slope roofs are often overdue. Architectural Metal Panels serves Richland Hills homeowners in Tarrant County with metal roofing designed for low slopes, seamless gutters, soffit and fascia, seamless steel siding and custom sheet metal. Our crews work throughout the city, from Glenview to the streets around Baker Boulevard and the Link, about eight miles from downtown Fort Worth near the SH-121 and SH-183 split.
- 26+ years in business
- Lifetime warranty
- Free written estimates
Built Around the Homes of Richland Hills
Richland Hills is almost entirely 1950s-1960s single-story brick and frame ranch homes with low-slope composition roofs on mature lots. Neighborhoods like Glenview and the Creek Trail Park area typically share the same patterns: composition roofs that age fast because low pitches drain slowly, often wide eaves with original wood fascia and soffit, gutters that have lost their pitch, and frame walls with painted wood siding. Mature trees add leaf load and shade. Some roofs have been patched more than replaced. A mechanically seamed standing seam roof suited to low slopes, new vented soffit and fascia, re-pitched seamless gutters and steel siding on frame sections usually give these homes decades of low-maintenance life.
We serve Richland Hills homeowners in Glenview, around Link Plaza and Baker Boulevard, near the Creek Trail Park area and the Link Event and Recreation Center, and along the SH-121 and SH-183 split.
How Richland Hills Weather Treats a Roof
Richland Hills sits just west of the Mid-Cities zone that took golf-ball hail on May 27, 2024, and the derecho the next day swept the same area. In the March 2025 outbreak, 90 mph winds collapsed a warehouse wall in Richland Hills, a reminder that wind can be as damaging as hail here. Low-slope roofs are especially vulnerable to wind-driven rain and lifted edges, so we favor mechanically seamed standing seam with high uplift ratings and, where available, UL 2218 Class 4 impact resistance. Ask your carrier about Class 4 credits, and have the roof checked after severe wind or hail.
- Class 4 (UL 2218) impact-rated roofing options, with the certificate your insurer asks for
- Free post-storm inspections with dated photos and measurements
- Adjuster meetings on site so the claim scope is complete
Storm damage? Start with our roof repair and storm inspection service, or compare impact-rated metal roofing.
What We Install for Richland Hills Homeowners
In Richland Hills, the roof system itself is the main event: low-slope ranch roofs are often a poor match for composition roofing and a good match for mechanically seamed standing seam. Soffit and fascia come next, since original wood trim on 1950s-1960s homes is often soft. Seamless gutters with guards handle mature-tree debris, and steel siding suits the frame homes.
Metal Roofing
Concealed-fastener standing seam, metal shingles and stone-coated steel, available with UL 2218 Class 4 ratings that many Texas insurers recognize.
Metal Wall Panels
Aluminum composite (ACM) and corrugated metal wall panels for storefronts, shops and modern homes in Richland Hills, fabricated and installed by our own crews.
Siding
Replace cracked, faded or hail-dented siding with materials rated for Texas heat, installed and trimmed by our own crews.
Seamless Gutters
Gutters formed on site to your home’s exact lengths, with downspouts and extensions placed to protect your slab foundation.
Soffit & Fascia
Fascia repair and replacement, vented soffit panels and aluminum wrap that will not need paint every few summers.
Want a ballpark before anyone visits? Our metal roof cost calculator prices a Richland Hills roof from its size, panel and add-ons in about a minute.
Working With Richland Hills HOAs and Permit Offices
Richland Hills has no meaningful HOA presence, so association approval is rarely a factor; the city permit is, and we pull it where required. If deed restrictions or a small association do apply to your lot, Texas Property Code §202.011 generally prevents an HOA from prohibiting impact-resistant or energy-efficient roofing that resembles and matches the approved roofing. On these older homes, we also confirm decking condition before quoting, since low-slope roofs often hide soft spots.
Quick Facts for Richland Hills Homeowners
| County | Tarrant County |
| ZIP codes served | 76118 |
| Population | About 8,500 residents |
| Distance | About 30 miles from downtown Dallas and 8 miles from downtown Fort Worth |
| Services | Metal roofing, metal wall panels, custom sheet metal, seamless gutters, siding, soffit & fascia |
| Estimates | Free, in-home and written, with a lifetime-warranty option on every installation |
What You Can Expect From Us in Richland Hills
- Daily cleanup and a magnetic nail sweep before the crew leaves.
- HOA submittal packages prepared for you, including product data sheets and color samples.
- Written, all-inclusive estimates: the price we quote is the price you pay.
- Our own trained installation crews, not day-labor subcontractors.
- A lifetime material and workmanship warranty that transfers if you sell. See what it covers.
Richland Hills Roofing and Exterior FAQs
What roof pitch is too low for composition roofing on a Richland Hills ranch?
Most composition roofing manufacturers require at least a 2:12 pitch, with extra underlayment below 4:12, and some 1950s-1960s Richland Hills ranches sit close to that line. Composition roofing on very low slopes tends to leak early. Mechanically seamed standing seam is rated by many manufacturers for much lower slopes, so we measure your pitch before recommending a system.
Can I keep my 1950s Richland Hills home’s look with a metal roof?
Yes. A low-profile standing seam in a muted color suits the long, low lines of a 1950s-1960s ranch, and it can sharpen the mid-century character rather than change it. If you prefer a dimensional look, some metal shingles are rated for lower slopes. We bring color samples so you can see them against your brick or siding before you decide.
My Richland Hills roof is old. Will my insurer still cover it?
Possibly at a reduced amount. Many Texas insurers now pay older roofs on an actual-cash-value schedule, which deducts depreciation, so a 15- or 20-year-old roof may be covered for a fraction of replacement cost. Check your declarations page or ask your agent. Replacing an aging roof can restore full replacement-cost coverage on some policies.
Do you offer free estimates in Richland Hills?
Yes. We provide free, no-obligation in-home estimates throughout Richland Hills and the rest of Tarrant County. A specialist inspects your roof or exterior, takes measurements and photos, and gives you a written, all-inclusive price, usually during the same visit.
Also Serving Neighbors of Richland Hills
- Haltom City (2 mi)
- North Richland Hills (3 mi)
- Hurst (4 mi)
- Watauga (4 mi)
- Bedford (7 mi)
- Colleyville (7 mi)
See every community on our Dallas-Fort Worth service area page.
Get a Free Estimate in Richland Hills
Call (469) 569-3956 or request a free in-home estimate online. We serve Richland Hills and communities across Tarrant County.