Tarrant County · Rendon, Texas
Metal Roofing for Rendon Homesteads, Barns and New Builds
Rendon has no city government of its own: it is an unincorporated community in south Tarrant County, where acreage, ranch homes and manufactured homes now share FM 1187 with new brick subdivisions spreading from Mansfield and Burleson. Architectural Metal Panels serves Rendon property owners with metal roofing for homes, barns and shops, seamless steel siding, custom sheet metal, seamless gutters and soffit and fascia. We plan each project around the property, whether it is an acreage homestead or a new HOA street.
- 26+ years in business
- Lifetime warranty
- Free written estimates
Built Around the Homes of Rendon
Rendon’s housing ranges from 1970s-2000s ranch homes and manufactured homes on acreage along the Rendon Road and FM 1187 corridor and Rendon-Bloodworth Road to 2010s-2020s brick subdivisions creeping in from Mansfield and Burleson. Older rural homes often have composition roofs at the end of their life, small or missing gutters, and wood trim exposed to full sun, often with little tree cover on cleared pasture. Manufactured homes can have low-slope roofs that leak at seams. Acreage often includes a barn, shop, carport or equipment shed. Standing seam on the house, exposed-fastener panels on outbuildings and seamless gutters sized for long runs fit most Rendon properties.
We serve Rendon properties along the Rendon Road and FM 1187 corridor, Rendon-Bloodworth Road and the Village Creek area, across the Mansfield ISD and Burleson ISD sides of the community.
Hail and Storm Risk in Rendon
Rendon sits between Mansfield, which took 2-inch hail on May 27, 2024, and Everman, where baseball-size hail fell on June 1, 2025. Open acreage offers little shelter, so roofs, siding and outbuildings take wind and hail head-on. For Rendon homes we recommend UL 2218 Class 4 metal roofing with high uplift ratings, and for barns and shops, heavier-gauge panels with fresh fasteners. A Class 4 roof on the house may qualify for a discount with your carrier; ask before you buy. After a storm, check outbuildings too, since damage there is easy to overlook.
- Roofing independently tested for impact resistance (UL 2218 Class 4), with its limits explained honestly
- Storm-damage inspections that separate real damage from wear
- A written, all-inclusive scope before any work begins
Storm damage? Start with our roof repair and storm inspection service, or compare impact-rated metal roofing.
Our Work in Rendon, TX
In Rendon, metal does double duty: Class 4 standing seam or metal shingles on the house, and exposed-fastener or standing seam panels on barns, shops and carports. Manufactured homes benefit from low-slope metal systems that can end seam leaks. Long rooflines on ranch homes need 6-inch seamless gutters to keep water off the slab, and sun-beaten trim calls for new soffit and fascia.
Metal Roofing
Standing seam and stone-coated steel systems with Class 4 impact ratings, installed by our own crews for Rendon homeowners tired of re-roofing after every hailstorm.
Metal Wall Panels
Metal wall systems that shrug off hail and sun: concealed-fastener Wave panels, exposed-fastener corrugated panels and ACM cladding.
Siding
Replace cracked, faded or hail-dented siding with materials rated for Texas heat, installed and trimmed by our own crews.
Seamless Gutters
Seamless 5- and 6-inch gutters and guards sized for North Texas downpours, moving water away from foundations on expansive clay soil.
Soffit & Fascia
Rotted fascia boards and sagging soffits replaced with low-maintenance materials that keep squirrels and birds out of the attic.
Price a standing seam roof for your Rendon home with our online metal roof cost estimator, then book a free measurement to lock it in.
Permits, HOAs and Paperwork in Rendon
Because Rendon is unincorporated, there is no city building department; most acreage is HOA-free, and HOAs appear only in the newest subdivisions. If you are in one, Texas Property Code §202.011 generally prevents the HOA from prohibiting impact-resistant or energy-efficient roofing that resembles and matches the approved roofing. Some addresses near Mansfield or Burleson fall inside city limits, so we check. We confirm whether any county, city or subdivision requirements apply and pull a permit where one is required.
Rendon Service Details
| County | Tarrant County |
| ZIP codes served | 76028, 76063, 76140 |
| Population | About 14,000 residents |
| Distance | About 36 miles from downtown Dallas and 16 miles from downtown Fort Worth |
| Services | Metal roofing, metal wall panels, custom sheet metal, seamless gutters, siding, soffit & fascia |
| Estimates | Free, in-home and written, with a lifetime-warranty option on every installation |
What You Can Expect From Us in Rendon
- We never waive or absorb insurance deductibles. Texas law prohibits it, and we follow the law.
- Daily cleanup and a magnetic nail sweep before the crew leaves.
- HOA submittal packages prepared for you, including product data sheets and color samples.
- Written, all-inclusive estimates: the price we quote is the price you pay.
- Our own trained installation crews, not day-labor subcontractors.
Frequently Asked Questions in Rendon
Is a permit required to re-roof in unincorporated Rendon?
Often not from a city, since most of Rendon sits outside any city limits, but it depends on your exact address. Some properties near Mansfield or Burleson are inside city limits, and some subdivisions have their own rules. We check your address, confirm what applies, and handle any permit or HOA approval needed before the crew arrives.
What gauge metal should go on a Rendon barn?
For most barns and shops, 26-gauge exposed-fastener panels are an economical, durable choice, and 24-gauge adds dent resistance where hail is frequent, as it is in south Tarrant County. If the building houses equipment or livestock, we also look at ventilation and condensation control under the panels. Matching the house color keeps the property looking unified.
Will a metal roof be loud on my Rendon home during storms?
Not usually. On a house, metal goes over solid decking and underlayment with an insulated attic below, so rain typically sounds similar to a composition roof. Barns and open shops with panels on bare purlins are louder, which is normal for working buildings. If you want a quieter shop, we can discuss decking or insulation under the panels.
Do you help Rendon homeowners with insurance claims?
We document hail and wind damage with dated photos and measurements, meet your adjuster on site and make sure the scope is complete. Your insurer decides coverage, and Texas law requires you to pay your deductible, which we never waive.
Nearby Communities We Serve
See every community on our Dallas-Fort Worth service area page.
Ready to Protect Your Rendon Home?
Request your free, written estimate today, or call (469) 569-3956 to talk with a specialist about your Rendon home.